Specification |
Test Method |
Amount |
Denier |
|
1,100 |
Count per square inch |
Warp x weft |
14 x 14 |
Coated fabric thickness |
|
11-12 mil |
Weight per square yard |
|
6.0 oz. ±5% |
Coating thickness (each side) |
|
3.15 mil |
Grommet spacing (approx.) |
Reinforced & Sewn
|
Approx. 30 in |
Test Criteria |
|
|
Breaking strength |
ASTM D-5034-96 grab |
Warp: 202 lbs.
Weft: 168 lbs. |
Tear strength |
ASTM D-5587-96 |
Warp: 44 lbs.
Weft: 40 lbs. |
Abrasion resistance |
ASTM D-3886-92 |
1,720 cycles |
Hydrostatic resistance |
FTMS 191 A-5516-78
88.0 psi @ 150 CMS |
No leakage |
Burst strength |
ASTM D-751-95 |
260 psi avg. |
Acid, alkali, and salt resistance |
2-hour soak in 5% solution |
No change |
Flammability |
Meets the flammability requirements of Commercial Standard CS192-53 ¶ 4.10 for general purpose vinyl plastic film |
|
Cold resistance |
FTMS 191 A-5874-78
-20°F/30 min./10# roller/72 lbs. |
No visible cracking |
Ultraviolet resistance |
|
Excellent |
Seam strength |
ASTM D-1682 |
90+ lbs. |
Grommet strength |
Instron TTC-3D grips 12" min. |
80+ lbs. |
Corner patch strength |
Instron TTC-3D grips 12" min. |
200+ lbs. |
All specifications were determined by an independent testing laboratory.
Specifications may vary.